By hazelsmith Is the ring LED light on your Orbi LED light solid magenta? Well, this issue could have occurred due to no internet connection. Are you unable to access the Orbi login page because of it? Well, in that case, you should thank your lucky stars. The reason being, they have brought you to this article amongst the thousands lurking on the web.
If you keep the approach of walking through the solutions in this article careful, then nothing will stop you from fixing the Netgear Orbi LED light solid magenta issue. So, gather the courage and walk through the troubleshooting tips given here.
How to Fix Netgear Orbi LED Light Solid Magenta Issue?
Check the Router-Modem Connection
The troubleshooting process can be commenced if you check the connection between the Netgear Orbi router and the existing modem. In case it is weak, then it is recommended that you replace the cable which is holding the connection between them in place. Although this will help you to fix the issue at hand, on the off chance, no fruit gets bear; you should go through the next troubleshooting solution. It might help you out.
Upgrade the Netgear Orbi Firmware
The second troubleshooting tip that can be used to resolve the Netgear Orbi LED light solid magenta issue is to update the firmware of the router to the latest version. For this, you can use any method that you like and in case you are uncertain about executing even one of them, you can go through the process given in the user manual of your networking device.
Change the Netgear Router Location
Check the location of your Netgear Orbi router. Where have you located it? Is it near baby monitors, cordless phones, washing machines, treadmills, televisions, microwave ovens, refrigerators, and mirrors? Well then, now is the time to change its location. You can do so by unplugging the Orbi from the wall socket that it is currently plugged into and connect it to the one which is located far away from the above-mentioned examples.
Power Cycle the Netgear Orbi Devices
Another thing that can be done from your end to get rid of the Netgear Orbi LED light solid magenta issue is to power cycle the Netgear Orbi devices. This means that you not only have to restart the router but also the satellite. The process to restart both devices will remain the same. You just need to turn the device off and on and wait in between.
Install the Netgear Orbi Router Again
This is the last troubleshooting tip in this article. In case nothing helped you out to fix the Netgear Orbi LED light solid magenta issue, then this is your last resort. You need to reset the device before you attempt to set it up using the orbilogin.com web address. In case you do not want to use the manual method to reconfigure the Orbi, then you can also use the Netgear Orbi application for the same purpose.
Verdict
Troubleshooting the Netgear Orbi LED light solid magenta is not that hard but for some reason, users get puzzled when it comes to doing so. Considering you have been amongst them, you will be able to convert the status of the LED light from magenta to green pretty quickly with the help of the troubleshooting tips given above.
On the off chance, you are not able to, worry not. Just reset your networking device and see if it works for you. If it does, do not hold yourself back from dropping a couple of words of appreciation in the comment section.
