By Nick Parker Are you not able to set up your Linksys AC1200 wireless range extender? Since you are reading this post, there is a possibility that you are stuck with Linksys extender setup issues. But now that you have landed on this post, solving Linksys AC1200 setup issues will not be a tough job for you. A Linksys extender helps to extend existing wireless range of the main router. You can get WiFi signals even in those areas that are outside the router’s range with the help of the extender. Let us help you complete the installation of the WiFi extender by removing the obstacles.
Let’s Fix Linksys Extender Setup Trouble!
There are two ways that you can use to complete the initial installation process of your extender. One is using the WPS method and the second is using the web interface on a computer or laptop. The solutions covered in this guide will help you fix issues that you might come across while following any of these methods of setup. Hence, read the post thoroughly and get rid of the problem in a jiffy.
1. Fix Technical Glitches
As the Linksys AC1200 wireless range extender and the main router are technical devices, they both may get affected by technical glitches. The temporary hiccups can stop you from completing the setup process.
All you need to do is reboot the devices or simply power cycle the network. Power cycling the network works like magic to eliminate temporary technical glitches from the devices thereby resolving many issues. So, power down the main router and the Linksys AC1200. Unplug their power cable from the sockets. Also, take out any other cables that are connected to these devices. Also, power off the computer or laptop that you are using to set up the extender.
Wait for some time and power on the main router first then the extender and finally the PC. Set up your extender easily now.
2. Connect to the Right Network
When you are using the web interface method for the setup process, make sure that the computer is connected to the extender’s network. If you aren’t using the local network, extender.linksys.setup page won’t work. To be able to log in to your extender, you must connect your computer to its network.
If you are already connected to the extender’s WiFi but still fail to complete the task at hand, then try using a LAN connection now. Use a LAN cable and make the connection between the PC and extender.
3. Verify the Electrical Supply
If you are failing to set up you Linksys AC1200 extender, then there’s one possibility that the extender‘s power supply is not adequate. If the extender is not powered up completely, then you will face issues connecting to its network and hence you won’t set it up. Verify the power connection now. Thoroughly check the power socket and the power cable and make the necessary amendments if needed to ensure an optimum power supply to the Linksys AC1200 extender.
Also, check the same with the main router.
Use the Right WPS Process
In the event of connecting the Linksys extender to the main router using the WPS buttons, you should ensure using the correct buttons on both devices. You need to press the WPS button on your extender and then press the WPS button on the host router. See to it that you are pressing the button on the second device within two minutes of doing the same on the first device. Make sure that both devices are fully powered up while you are trying to connect them.
Wrap Up
Using the solutions provided in this guide, you will be able to complete the setup of your Linksys extender without any trouble. Enjoy the trouble-free and extender network in your home without any hassle now.
